DTC P2274: O2 Sensor Signal Stuck Lean - Bank 1, Sensor 3
WARNING: This page is about a different variant/trim than selected.
P2274 - O2 SENSOR SIGNAL STUCK LEAN - BANK 1, SENSOR 3
| Description: | See the description for DTC P2270 . | ||
| Possible Causes: | See the possible causes for DTC P2270 . | ||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to H: Fuel Control STEP H49. | GO to H: Fuel Control STEP H49. |