DTC P1289: Cylinder Head Temperature (CHT) Sensor Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P1289 - CYLINDER HEAD TEMPERATURE (CHT) SENSOR CIRCUIT HIGH INPUT
| Description: | Indicates a CHT sensor circuit malfunction (open). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A CHT V PID reading of greater than 4.6 volts with key on engine off (KOEO), or during any engine operating mode, indicates a hard fault. Note: DTC P0118 may also be reported when this DTC is set. Either of these DTCs activate the MIL. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DL: Cylinder Head Temperature (CHT) Sensor STEP DL7. | GO to DL: Cylinder Head Temperature (CHT) Sensor STEP DL7. | GO to DL: Cylinder Head Temperature (CHT) Sensor STEP DL14. |