DTC P1115: Intake Air Temperature 2 (IAT2) Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P1115 - INTAKE AIR TEMPERATURE 2 (IAT2) CIRCUIT HIGH INPUT
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT2 sensor maximum is 4.6 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID. A typical IAT2 temperature should be greater than the IAT1 temperature. Refer to REFERENCE VALUES - GASOLINE MODELS for ranges. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DU: Intake Air Temperature 2 (IAT2) Sensor STEP DU1. | ||