DTC P1114: Intake Air Temperature 2 (IAT2) Circuit Low Input
WARNING: This page is about a different variant/trim than selected.
P1114 - INTAKE AIR TEMPERATURE 2 (IAT2) CIRCUIT LOW INPUT
| Description: | Indicates the sensor signal is less than the self-test minimum. The IAT2 sensor minimum is 0.2 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID. A typical IAT2 temperature should be greater than the IAT1 temperature. Refer to REFERENCE VALUES - GASOLINE MODELS for ranges. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DU: Intake Air Temperature 2 (IAT2) Sensor STEP DU5. | ||