DTC P0511: Idle Air Control (IAC) Circuit Malfunction
WARNING: This page is about a different variant/trim than selected.
P0511 - IDLE AIR CONTROL (IAC) CIRCUIT MALFUNCTION
| Description: | This DTC is set when the powertrain control module (PCM) detects an electrical load failure on the IAC output circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IAC solenoid resistance is 6 to 13 ohms. Monitor the IAC PID duty cycle and/or voltage. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to KE: Idle Air Control (IAC) Valve STEP KE1. | ||