DTC P0345: Camshaft Position (CMP) Sensor Circuit Malfunction (Bank 2)
WARNING: This page is about a different variant/trim than selected.
P0345 - CAMSHAFT POSITION (CMP) SENSOR CIRCUIT MALFUNCTION (BANK 2)
| Description: | The test fails when the powertrain control module (PCM) can no longer detect the signal from the CMP sensor on bank 2. | ||
| Possible Causes: | See the possible causes for DTC P0340 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0340 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DR: Camshaft Position (CMP) Sensor STEP DR1. | ||