DTC P0231: Fuel Pump Secondary Circuit Low
WARNING: This page is about a different variant/trim than selected.
P0231 - FUEL PUMP SECONDARY CIRCUIT LOW
| Description: | The powertrain control module (PCM) monitors the fuel pump monitor (FPM) circuit. The test fails if the PCM commands the fuel pump ON and B+ voltage is not detected on the FPM circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | During the key on engine off (KOEO) self-test, the PCM commands the fuel pump on so this test can be carried out. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Excursion | GO to KA: Fuel Pump (FP) Relay STEP KA56. | GO to KA: Fuel Pump (FP) Relay STEP KA56. | GO to KA: Fuel Pump (FP) Relay STEP KA61. |
| All others | GO to KA: Fuel Pump (FP) Relay STEP KA22. | GO to KA: Fuel Pump (FP) Relay STEP KA22. | GO to KA: Fuel Pump (FP) Relay STEP KA29. |