DTC P0198: Engine Oil Temperature (EOT) Sensor Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P0198 - ENGINE OIL TEMPERATURE (EOT) SENSOR CIRCUIT HIGH INPUT
| Description: | Indicates EOT signal voltage is high (low temperature). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An EOT V PID reading greater than 4.5 volts with the key on engine off (KOEO) or during any engine operating mode indicates an open circuit hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DY: Engine Oil Temperature (EOT) Sensor STEP DY2. | ||