DTC P0180: Fuel Temperature Sensor A Circuit
WARNING: This page is about a different variant/trim than selected.
P0180 - FUEL TEMPERATURE SENSOR A CIRCUIT
| Description: | The comprehensive component monitor (CCM) monitors the fuel temperature sensor circuit to the powertrain control module (PCM) for low and high voltage. If voltage falls below or exceeds a calibrated limit and amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the FRT PID value to determine an open or short. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Fuel rail pressure temperature (FRPT) sensor | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD47. | ||
| Fuel rail pressure (FRP) and fuel rail temperature (FRT) sensors | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD22. | ||