DTC P0135: HO2S Circuit Malfunction (HO2S-11)
WARNING: This page is about a different variant/trim than selected.
P0135 - HO2S CIRCUIT MALFUNCTION (HO2S-11)
| Description: | During testing the heated oxygen sensor (HO2S) heaters are checked for opens/shorts and excessive current draw. The test fails when the current draw exceeds a calibrated limit and/or an open or short is detected. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Wiring. Damaged HO2S heater. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to H: Fuel Control STEP H7. | ||