DTC P0113: Intake Air Temperature (IAT) Sensor 1 Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH INPUT
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT sensor maximum is 4.6 volts or -50°C (-58°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT V PID reading greater than 4.6 volts with the key on engine off (KOEO) or during any engine operating mode indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DA: Intake Air Temperature (IAT) Sensor STEP DA1. | GO to DA: Intake Air Temperature (IAT) Sensor STEP DA1. | GO to DA: Intake Air Temperature (IAT) Sensor STEP DA8. |