DTC P0106: Manifold Absolute Pressure (MAP/BARO) Sensor Range/Performance
WARNING: This page is about a different variant/trim than selected.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE
| Description: | MAP sensor input to the powertrain control module (PCM) is monitored and is not within the calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | VREF voltage should be between 4.0 and 6.0 volts. The PID reading is in frequency. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Vehicles with an EGR system module (ESM) | GO to DM: Manifold Absolute Pressure (MAP) Sensor STEP DM14. | ||
| All others | GO to DM: Manifold Absolute Pressure (MAP) Sensor STEP DM16. | ||