LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Engine Controls - Pinpoint Test DY: Engine Oil Temperature (EOT) Sensor Through Pinpoint Test Hf: Catalyst Efficiency Monitor And Exhaust Systems - (Except Diesel & Hybrid)) >> Pinpoint Test HD: Misfire Detection Monitor >> Introduction >> Notes

Pinpoint Test HD: Misfire Detection Monitor: Introduction: Notes

WARNING: This page is about a different variant/trim than selected.
WARNING: CROWN VICTORIA POLICE INTERCEPTOR VEHICLES EQUIPPED WITH FIRE SUPPRESSION SYSTEM, REFER TO FIRE SUPPRESSION SYSTEM FOR IMPORTANT SAFETY WARNINGS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

This pinpoint test is intended to diagnose the misfire detection monitor.

Clearing the PCM DTCs will erase any PCM recorded freeze frame data. Make sure to record any PCM freeze frame information before proceeding any further. REFER to FREEZE FRAME DATA .

scientia non olet · About LEMON Manuals