Inertia Fuel Shutoff (IFS) Switch - Reset Instructions

WARNING: This page is about a different variant/trim than selected.

Key in OFF position.
Check for fuel leaks in the engine compartment.
If no leak is present, reset the IFS switch by pushing the reset button on the top of the switch (refer to the Owner's Literature for IFS switch location).
In the closed position, the button can be pressed an additional 1.57 mm (1/16 in) against a spring.
Key ON, engine OFF.
Key in OFF position.
Key ON, engine OFF.
Key in OFF position.
Check for leaking fuel.