LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)) >> On-Board System Readiness (OSR) >> Description

On-Board System Readiness (OSR): Description

WARNING: This page is about a different variant/trim than selected.

All on-board diagnostic (OBD) diagnostic tools display the on-board system readiness (OSR) test. The OSR will display the supported monitors on the vehicle and the status of all monitors (complete or not complete) at that time. Fuel, misfire, and comprehensive component monitors run continuously and always display YES status. Clearing the continuous diagnostic trouble codes (DTCs) and resetting the emission monitors information in the powertrain control module (PCM), or resetting the keep alive memory (KAM) causes the non-continuous monitors to change to a NO status.

scientia non olet · About LEMON Manuals