Spark Plugs: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Remove the upper intake manifold. For additional information, refer to ENGINE - 3.0L (4V) .
- Disconnect the ignition coil electrical connectors.
- Remove the bolts and the ignition coils.
- Remove the spark plugs.
Both sides
RH side
NOTE:
The upper intake manifold must be removed to access the RH spark plugs only.
Both sides
NOTE:
Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.