Intermediate/Overdrive Servo Apply Rod Specifications
WARNING: This page is about a different variant/trim than selected.
INTERMEDIATE/OVERDRIVE SERVO APPLY ROD SPECIFICATIONS
| Part Number |
Number of Rings |
Rod Length |
| F3RP-7H188-CB |
0 |
108.1 mm (4.25 in) |
| F3RP-7H188-BB |
1 |
107.1 mm (4.21 in) |
| F3RP-7H188-AB |
2 |
105.7 mm (4.16 in) |