LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transmission - Cd4E) >> Diagnosis And Testing >> Pinpoint Tests - Non OSC Equipped Vehicle >> Pinpoint Tests >> Pinpoint Test H: Solenoid Mechanical Failure

Pinpoint Test H: Solenoid Mechanical Failure

WARNING: This page is about a different variant/trim than selected.
NOTE: Repair all other DTCs before repairing the following DTCs: P1714, P1715.
  1. H1 ELECTRONICS DIAGNOSIS 
    • Disconnect the scan tool.
    • Select PARK.
    • Key in ON position.
    • Carry out KOEO Test until continuous DTCs have been displayed.
    • If P1714, P1715 DTCs are present, continue with this test.
    • Are other DTCs present for TFT or shift solenoids? 
    1. Yes  : REPAIR the DTCs for TFT or shift solenoids first. CLEAR the DTCs and CARRY OUT Transmission Drive Cycle Test. RERUN Quick Test.
    2. No  : INSTALL a new solenoid and/or body. REFER to MAIN CONTROL VALVE BODY . GO to H2.
  2. H2 TRANSAXLE DRIVE CYCLE TEST 
    1. Yes  : GO to H3.
    2. No  : REFER to DIAGNOSIS BY SYMPTOM  to diagnose shift concerns.
  3. H3 RETRIEVE DTCs 
    • Connect the scan tool.
    • Select PARK.
    • Key in ON position.
    • Carry out KOEO Test until continuous DTCs have been displayed.
    • Are DTCs P1714, P1715 still present? 
    1. Yes  : INSTALL a new PCM. ROAD TEST and RERUN Quick Test.
    2. No  : Testing completed. If a concern still exists. REFER to DIAGNOSIS BY SYMPTOM .
scientia non olet · About LEMON Manuals