Other Concerns: Engine Will Not Crank

WARNING: This page is about a different variant/trim than selected.

DIAGNOSTIC ROUTINES - OTHER CONCERNS ENGINE WILL NOT CRANK

Possible Component	Reference/Action
255 - ELECTRICAL ROUTINE
Powertrain Control System
Base engine concerns	Refer to INTRODUCTION - GASOLINE article for Escape (gasoline) and Mariner or INTRODUCTION- HYBRID ESCAPE article for Escape (Hybrid).
Electrical inputs/outputs, vehicle wiring harnesses, powertrain control module, transmission range (TR) sensor damaged, misadjusted	Run On-Board Diagnostics Tests. Refer to INTRODUCTION - GASOLINE article for Escape (gasoline) and Mariner or INTRODUCTION- HYBRID ESCAPE article for Escape (Hybrid). GO to PINPOINT TEST D .
355 - HYDRAULIC/MECHANICAL ROUTINE
Starter/Flexplate
Damaged or misassembled	Inspect for damage, misassembly. Repair as necessary.
Internal and External Shift Linkages or Transmission Range (TR) Sensor
Damaged, out of adjustment or misassembled	Verify linkage adjustment. Refer to AUTOMATIC TRANSAXLE-TRANSMISSION EXTERNAL CONTROLS - CD4E . After repairing linkage, verify that the transmission range (TR) sensor is correctly adjusted.