LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Engine Emission Control - 2.3L - (Hybrid)) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold. For additional information, refer to ENGINE - 2.3L HYBRID article.
  2. Depress the 2 release tabs and remove the PCV valve.
    3. Fig 1: PCV Valve
    GF0024483Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals