LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 869 (Sunroof) >> Removal And Installation >> Roof Opening Panel Frame >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Disconnect the 4 roof opening panel drain hoses.
  3. Release the wire harness locators.
  4. Remove the 8 roof opening panel frame bolts and remove the roof opening panel frame.
    • To install tighten to 9 Nm (80 lb-in).
  5. To install, reverse the removal procedure.