LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Removal And Installation >> Push Button Rod - Rear, Crew Cab >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Position the watershield aside.
  3. Remove the push button rod guide clip and remove the push button rod.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals