LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 733 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the switch plate cover.
  2. Disconnect the switch plate electrical connectors.
  3. Release the door lock control switch tabs on the switch plate and remove the door lock control switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals