Removal & Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not necessary to remove the audio unit to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval .
- Remove the instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL & CONSOLE article.
- Remove the 2 screws and the clock.
- Disconnect the electrical connector.
- Remove the 4 screws and the audio unit.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.