Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

If equipped, remove the storage bin.
- Release the locking tabs and remove the storage bin.

Fig 1: Identifying Locking Tabs

Courtesy of FORD MOTOR CO.

Remove the floor console.
- Through the floor console opening, push and hold the locking clip while lifting upward.

Fig 2: Pushing & Holding Locking Clip While Lifting Upward

Courtesy of FORD MOTOR CO.

NOTE: When installing the floor console, be sure the locking clip is fully engaged.

To install, reverse the removal procedure.