Other Concerns: Vehicle Movement With Gear Selector In The "N" Position

WARNING: This page is about a different variant/trim than selected.

DIAGNOSTIC ROUTINES - OTHER CONCERNS VEHICLE MOVEMENT WITH GEAR SELECTOR IN N POSITION

Possible Component	Reference/Action
262 - ELECTRICAL ROUTINE
No Electrical Concerns
362 - HYDRAULIC/MECHANICAL ROUTINE
Internal or External Shift Linkages
Damaged, out of adjustment or misassembled	Inspect and repair as required. Verify linkage adjustment. Refer to AUTOMATIC TRANSAXLE-TRANSMISSION EXTERNAL CONTROLS - CD4E . After repairing linkage, verify that the transmission range (TR) sensor is correctly adjusted.
Pump Assembly
Gaskets severely damaged	Inspect for damage. Install new as necessary.
Pump support seal ring No. 2, leakage from lube circuit into forward clutch circuit	Inspect for damage. Install new as necessary.
Forward/Coast Clutch Assembly
Friction plates severely damaged	Inspect for damage. Install new as necessary.
Return spring damaged	Inspect for damage. Install new as necessary.
Check ball damaged, missing	Inspect for damage. Install new as necessary.