LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 790 (Electronic Engine Controls - Gasoline Engine -- F250-F550 Super Duty) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid - 5.4L >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve cover. For additional information, refer to ENGINE - 5.4L (3V) article.
  2. Remove the bolt and the variable camshaft timing (VCT) oil control solenoid.
    • To install, tighten to 5 N.m (44 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals