Rear Disc Brake

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The braking system includes the brake caliper, the brake pads and the brake disc. The brake caliper is a single piston, floating design. The brake caliper is mounted to the rear knuckle by the caliper guide bolts. The brake caliper slides, or floats, on the caliper guide pins. The brake disc is a cast, non-ventilated type rotor. When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the master cylinder. The hydraulic force is directed to the brake calipers and transferred to the brake pads. The brake pads are then forced against the brake disc friction surfaces by the brake caliper pistons. The friction of the brake pads on the brake disc causes the slowing of wheel rotation and the vehicle.

The brake caliper support bracket is removed with the brake disc shield. Refer to Brake Disc Shield in this article.