LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1008 (Instrument Panel And Console) >> Removal And Installation >> Instrument Panel Center Finish Panel - Middle >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper instrument panel center finish panel. For additional information, refer to Instrument Panel Center Finish Panel - Upper .
  2. Remove the lower instrument panel center finish panel. For additional information, refer to Instrument Panel Center Finish Panel - Lower .
  3. Remove the 4 middle instrument panel center finish panel screws.
  4. Remove the middle instrument panel center finish panel.
    • Pull outward to release the retaining clips.
    • Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals