LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Cooling - (Hybrid)) >> Diagnosis And Testing >> Engine Cooling >> Cooling Fan Motor and Shroud

Cooling Fan Motor and Shroud

WARNING: This page is about a different variant/trim than selected.
  1. Inspect the fan blade and shroud for any foreign materials. Clear the obstruction and continue the test procedure.
  2. Rotate the fan to see if any contact between the shroud and blade exists. If contact is observed, install a new fan shroud assembly.
  3. Rotate the fan by hand. The fan should rotate freely (no resistance should be felt, the fan will free-wheel with minimum effort). If any resistance is present, install a new fan assembly.
scientia non olet · About LEMON Manuals