LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Controls - Pinpoint Tests - (Hybrid)) >> NC: Ignition Engine Speed Input Circuit >> Test Procedures

Test Procedures

WARNING: This page is about a different variant/trim than selected.
  1. NC1 CONTINUOUS MEMORY DTC P0320: ERRATIC IGNITION 
    NOTE: Verify all 2-way radio installations. Carefully follow the manufacturer's installation instructions regarding the routing of the antenna and power leads.

    Are any concerns present? 

    Yes No
    REPAIR as necessary. GO to  NC2.
  2. NC2 NO START CONCERN 

    Is the customer complaint a no start concern? 

    Yes No
    GO to Pinpoint Test A . GO to  NC3.
  3. NC3 INTERMITTENT FAULTS 

    Is this an intermittent concern? 

    Yes No
    GO to Pinpoint Test Z . GO to Pinpoint Test JD .