DTC U0418: Invalid Data Received From Anti-Lock Brake System Control Module
WARNING: This page is about a different variant/trim than selected.
U0418 - INVALID DATA RECEIVED FROM ANTI-LOCK BRAKE SYSTEM CONTROL MODULE
| Description: | The PCM continuously monitors CAN network for messages from the ABS. This DTC is set when the PCM fails to receive the ABS message within a defined time period, or when the message received is out of expected range, or if the message received contains invalid data. When this DTC is set the regenerative braking is disabled until the next driving cycle. | ||
| Possible Causes: | See the possible causes for DTC U0073 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC U0001 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to MODULE COMMUNICATIONS NETWORK . | ||