DTC U0402: Invalid Data Received From TCM
WARNING: This page is about a different variant/trim than selected.
U0402 - INVALID DATA RECEIVED FROM TCM
| Description: | The TBCM continuously monitors the CAN network for messages from the TCM. This DTC is set when the message received from the TCM is out of expected range or contains invalid data. | ||
| Possible Causes: | See the possible causes for DTC U0073 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC U0001 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to MODULE COMMUNICATIONS NETWORK . | ||