DTC P2806: (TCM) - Transmission Range Sensor Alignment
WARNING: This page is about a different variant/trim than selected.
P2806 (TCM) - TRANSMISSION RANGE SENSOR ALIGNMENT
| Description: | The TCM monitors vehicle speed and gear position. This DTC indicates that vehicle speed exceeded the maximum calibrated speed in PARK. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test TQ . | - | GO to Pinpoint Test TQ . |
WORKSHOP MANUAL -(TBCM)
| Description: | |||
| Possible Causes: | |||
| Diagnostic Aids: | For P DTCs not listed in this chart, refer to the customer's symptom to determine the applicable article for diagnosis. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | For P DTCs not listed in this chart, refer to the customer's symptom to determine the applicable article for diagnosis. | ||