DTC P2128: Accelerator Pedal Position (App) Sensor Circuit 2 High Input
WARNING: This page is about a different variant/trim than selected.
P2128 - ACCELERATOR PEDAL POSITION (APP) SENSOR CIRCUIT 2 HIGH INPUT
| Description: | The APP sensor 2 is out of range high input. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP2 sensor PID reading may indicate a fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DK . | ||