DTC P2106: Throttle Actuator Control (TAC) System - Forced Limited Power
WARNING: This page is about a different variant/trim than selected.
P2106 - THROTTLE ACTUATOR CONTROL (TAC) SYSTEM - FORCED LIMITED POWER
| Description: | The throttle actuator control system is in the FMEM mode of forced limited power. This DTC indicates the FMEM action is in effect due to a failure in an electronic throttle control (ETC) related component or module. | ||
| Possible Causes: | |||
| Diagnostic Aids: | This DTC is an informational DTC and may be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QE . | ||