DTC P1635: (TCM) - Tire/Axle Out Of Acceptable Range
WARNING: This page is about a different variant/trim than selected.
P1635 (TCM) - TIRE/AXLE OUT OF ACCEPTABLE RANGE
| Description: | The TCM continuously monitors the CAN network for a revolutions per mile message from the PCM. This DTC is set when the TCM fails to receive the message within a defined time period, or when the message received is out of expected range. When this DTC is set the active motor damping is disabled. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the diagnostic tool, view the tire and axle parameters within the VID. They must match the vehicle hardware. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test TG . | - | GO to Pinpoint Test TG . |