DTC P1299: Cylinder Head Over Temperature Protection Active
WARNING: This page is about a different variant/trim than selected.
P1299 - CYLINDER HEAD OVER TEMPERATURE PROTECTION ACTIVE
| Description: | Indicates an engine overheat condition was detected by the cylinder head temperature (CHT) sensor. An FMEM strategy called fail-safe cooling was activated to cool the engine. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Refer to POWERTRAIN CONTROL SOFTWARE , for more information on the fail-safe cooling strategy and the CHT sensor. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to Pinpoint Test DL . | GO to Pinpoint Test DL . |