DTC P1285: Cylinder Head Over Temperature Condition
WARNING: This page is about a different variant/trim than selected.
P1285 - CYLINDER HEAD OVER TEMPERATURE CONDITION
| Description: | Indicates an engine overheat condition was sensed by the cylinder head temperature (CHT) sensor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | On some applications when this fault occurs the engine temperature warning indicator will illuminate or force the temperature gauge to the full H (hot) zone. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DL . | ||