DTC P1270: Engine Rpm Or Vehicle Speed Limiter Reached
WARNING: This page is about a different variant/trim than selected.
P1270 - ENGINE RPM OR VEHICLE SPEED LIMITER REACHED
| Description: | Indicates the vehicle has been operated in a manner which caused the engine or vehicle to exceed a calibration limit. The engine RPM and vehicle speed are continuously monitored and evaluated by the PCM. The DTC is set when the RPM or vehicle speed falls out of a calibrated range. For additional information on the engine RPM and vehicle speed limiter, refer to POWERTRAIN CONTROL SOFTWARE . | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The DTC indicates the vehicle was operated in a manner which caused the engine or vehicle speed to exceed a calibrated limit. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test ND . |