DTC P1145: (Pcm) - Calculated Torque Error
WARNING: This page is about a different variant/trim than selected.
P1145 (PCM) - CALCULATED TORQUE ERROR
| Description: | This DTC indicates the engine was overproducing torque and overcharging the traction battery, when its operating temperature was below the calibrated threshold. To protect the traction battery the PCM disabled the fuel injectors. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is informational only. Check for any unmetered air leaks. Diagnose any air intake system related DTCs. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | This DTC is informational only. Check for any unmetered air leaks. Diagnose any air intake system related DTCs. | ||