DTC P0A1B: Drive Motor A Control Module

WARNING: This page is about a different variant/trim than selected.

P0A1B - DRIVE MOTOR A CONTROL MODULE

Description:

This DTC indicates a drive motor A control module (MCM) internal malfunction.

Possible Causes:

Diagnostic Aids:

Application

Key On Engine Off

Key On Engine Running

Continuous Memory

All

⁽¹⁾

⁽²⁾

⁽¹⁾	Install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) - HYBRID ESCAPE .

⁽²⁾	Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0A1A is present again, install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) - HYBRID ESCAPE .