DTC P0A09: Dc/Dc Converter Fault (DCF) Circuit Low
WARNING: This page is about a different variant/trim than selected.
P0A09 - DC/DC CONVERTER FAULT (DCF) CIRCUIT LOW
| Description: | This DTC indicates the DC to DC fault (DCF) circuit is shorted to ground, there is internal DC to DC damage, or the 12-volt bus voltage dropped below the calibrated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QE . | ||