DTC P0462: Fuel Level Sensor Circuit Low Input
WARNING: This page is about a different variant/trim than selected.
P0462 - FUEL LEVEL SENSOR CIRCUIT LOW INPUT
| Description: | The PCM monitors the CAN network for the fuel level input (FLI) message from the instrument cluster module. This DTC is stored when the FLI moves outside the minimum or maximum allowable calibrated parameters for a specified fuel fill percentage in the fuel tank. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Refer to INSTRUMENT CLUSTER for fuel level indicator diagnosis and repair any instrument cluster DTCs. If the DTCs are not present diagnose incorrect fuel gauge indication symptom. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to INSTRUMENT CLUSTER for fuel level indicator diagnosis and repair any instrument cluster DTCs. If the DTCs are not present diagnose incorrect fuel gauge indication symptom. | ||