DTC P0351: Ignition Coil A Primary/Secondary Circuit Malfunction
WARNING: This page is about a different variant/trim than selected.
P0351 - IGNITION COIL A PRIMARY/SECONDARY CIRCUIT MALFUNCTION
| Description: | Each ignition primary circuit is continuously monitored. The test fails when the PCM does not receive a valid IDM pulse signal from the ignition module (integrated in the PCM). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When checking functionality of the coil driver circuit, crank the engine using the engine cranking diagnostic mode. Refer to DIAGNOSTIC MODES . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to Pinpoint Test JF . | GO to Pinpoint Test JF . |