DTC P0223: Throttle Position (TP2) Sensor Circuit High Input
WARNING: This page is about a different variant/trim than selected.
P0223 - THROTTLE POSITION (TP2) SENSOR CIRCUIT HIGH INPUT
| Description: | The ETC TP2 sensor was flagged as fault status by the PCM indicating a high voltage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The fault exhibits a symptom of limited power. A TP2 PID (TP V PID) reading greater than 96.42% (4.65 volts) during key on engine off (KOEO) or key on engine running (KOER) indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DV . | ||