DTC P0133: Ho2S Sensor Circuit Slow Response (Ho2S-11)
WARNING: This page is about a different variant/trim than selected.
P0133 - HO2S SENSOR CIRCUIT SLOW RESPONSE (HO2S-11)
| Description: | The heated oxygen sensor (HO2S) monitor checks the HO2S frequency and amplitude. If during testing the frequency and amplitude fall below a calibrated limit, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Access the HO2S test results from the Generic OBD-II menu to verify the DTC. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test H . |