DTC P0106: Manifold Absolute Pressure (Map) Sensor Circuit Performance
WARNING: This page is about a different variant/trim than selected.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR CIRCUIT PERFORMANCE
| Description: | The MAP sensor input to the PCM is monitored and is not within the calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VREF voltage should be between 4.0 and 6.0 volts. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DM . | ||