LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Engine Controls - Diagnostic Methods - (Hybrid)) >> Intermittent Diagnostic Techniques >> Recreating the Fault

Recreating the Fault

WARNING: This page is about a different variant/trim than selected.

Recreating the fault is the first step in isolating the cause of the intermittent symptom. A thorough investigation should start with the customer information worksheet located in the back of the book. If freeze frame data is available, it may help in recreating the conditions at the time of a malfunction indicator lamp diagnostic trouble code (MIL DTC). Listed below are some of the conditions for recreating the fault:

CONDITIONS TO RECREATE FAULT CHART

Engine Type Conditions Non-Engine Type Conditions
Engine temperature Ambient temperature
Engine RPM Moisture conditions
Engine load Engine idle/accel/decel Road conditions (smooth-bumpy)
scientia non olet · About LEMON Manuals