LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Engine Controls - Diagnostic Methods - (Hybrid)) >> Basic Circuit Checks >> Shorts to Ground

Shorts to Ground

WARNING: This page is about a different variant/trim than selected.

Measure the harness resistance between the suspect circuit at the harness connector and a reliable ground (B-, chassis gnd or PWR GND at the PCM breakout box, if available). The resistance must be greater than 10,000 ohms.